REAR SEATBACK HEATER(for LH Side) INSTALLATION
CAUTION / NOTICE / HINT
Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.
PROCEDURE
INSTALL REAR SEATBACK HEATER ASSEMBLY LH
-
Using a tacker, install the rear seatback heater assembly LH with 16 new tack pins as shown in the illustration.
Tip:Secure the rear seatback heater assembly LH so that it does not bend or stretch.
Set the rear seatback heater assembly LH so that the nichrome wire is on the separate type rear seatback cover side.
-
Pass the wire harness through the hole of the separate type rear seatback cover.
-
INSTALL SEPARATE TYPE REAR SEATBACK COVER
INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD
INSTALL REAR SEATBACK BOARD LH
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH (w/ Child Restraint System Guide)
INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH (w/ Child Restraint System Guide)
INSTALL REAR SEAT COVER
INSTALL REAR SEATBACK COVER RH
INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY LH
INSTALL REAR SEATBACK COVER
INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
INSTALL REAR SEAT LOWER CUSHION HINGE COVER LH
INSTALL REAR SEAT NO. 3 CUSHION HINGE COVER
INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
INSTALL REAR SEATBACK NO. 1 BOARD CAP
INSTALL REAR SEAT NO. 1 CENTER ARMREST PLATE
INSTALL REAR SEAT CENTER ARMREST ASSEMBLY
INSTALL CENTER ARMREST HINGE COVER RH
INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT ASSEMBLY LH