WATER PUMP INSTALLATION

PROCEDURE

  1. INSTALL ENGINE WATER PUMP ASSEMBLY

    1. Install a new water pump gasket to the engine water pump assembly.

      Tip:

      Be sure to clean the contact surfaces.

    2. Apply adhesive 1324 to the threads of the bolt (C).

      Bolt Length

      Item

      Length

      Bolt (A) and (D)

      20 mm (0.787 in.)

      Bolt (B) and (C)

      35 mm (1.38 in.)
    3. A350042N02

      Temporarily install the engine water pump assembly to the timing chain cover assembly with the 6 bolts.

      Note:

      Tighten the bolts within 3 minutes of applying adhesive.

    4. A352378C03

      *a

      12 mm Union Nut Wrench

      *b

      Torque Wrench Fulcrum Length

      Using a 12 mm union nut wrench, tighten the bolt (A).

      Specified tightening torque

      21 N*m

      214 kgf*cm

      15 ft.*lbf

      Tip:

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click hereClick here

      • When using a 12 mm union nut wrench (fulcrum length of 20 mm (0.787 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 19 N*m (194 kgf*cm, 14 ft.*lbf)

    5. Tighten the bolt (B), bolt (C) and bolt (D).

      21 N*m

      214 kgf*cm

      15 ft.*lbf

  2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

    Click hereClick hereClick hereClick here

  3. INSTALL GENERATOR ASSEMBLY

    Click here

  4. ADD ENGINE COOLANT

    Click here

  5. INSPECT FOR COOLANT LEAK

    Click here