UNLOCK WARNING SWITCH INSPECTION

PROCEDURE

  1. INSPECT UNLOCK WARNING SWITCH ASSEMBLY

    B203483C05

    *a

    Component without harness connected

    (Unlock Warning Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Switch free (Key removed)

      10 kΩ or higher

      1 - 2

      Switch pushed (Key set)

      Below 1 Ω

      If the result is not as specified, replace the unlock warning switch assembly.