BODY PANEL SEALING APPLICATION AREAS


  1. Be sure to apply body sealer to the body panel joints and door edges (tip of outer panel folded part), etc., to waterproof and rustproof them.

    Tech Tips


    • Apply degreasing agent to a clean cloth and clean the sealer application areas.

    • After removing the applied spot sealer from the sealer application areas using thinner or equivalent, rust-proof the areas by applying primer or equivalent. Then apply body sealer.

    • If sealer is unnecessarily applied to an area, apply degreasing agent to a clean cloth and clean off the sealer immediately.

A0050KX Flat Finishing A0050HD No Flat Finishing
A0050I1
A0050E1
A0050F8
A0050JOE01
*1 w/o Glass Roof:
*2 w/ Glass Roof:
A0050D0
A0050CY
A0050FP