MULTI-DISPLAY REASSEMBLY

PROCEDURE


  1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A (for 8 Inch Display)


    1. A01R8PM

      Install the clip base to the multi-display controller bracket A with the 2 screws.

    2. A01RAS2

      Install the multi-display controller bracket A with clip base with the 6 screws.

  2. INSTALL ACCESSORY METER GLASS (for 12.3 Inch Display)


    1. A01RCHKC01
      B007Z37 Install in this Direction

      Engage the 2 guides and 2 claws as shown in the illustration.

    2. A01RE0R

      Install the accessory meter glass with the 4 screws.

  3. INSTALL MULTI INFORMATION DISPLAY CASE ASSEMBLY (for 12.3 Inch Display)


    1. A01RF17

      Engage the 7 guides and 4 claws.

    2. A01R9CI

      Install the multi information display case assembly with the 8 screws.

  4. INSTALL GAUGE WIRE (for 12.3 Inch Display)


    1. A01R9Y8C01
      B007Z37 Install in this Direction

      Engage the claw as shown in the illustration.

    2. Connect the connector to install the gauge wire.

    3. A01RDS5

      Engage the guide.

    4. Install the gauge wire bracket with the 2 screws.