REAR NO. 2 SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    B223753E01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Seat belt fastened (for RH side)

      (Buckle switch is on)

      1 MΩ or higher

      Seat belt unfastened (for RH side)

      (Buckle switch is off)

      Below 1 Ω

      3 - 4

      Seat belt fastened (for LH side)

      (Buckle switch is on)

      1 MΩ or higher

      Seat belt unfastened (for LH side)

      (Buckle switch is off)

      Below 1 Ω
      Table 1. Text in Illustration

      *1

      Component without harness connected

      (Rear No. 2 Seat Inner Belt Sub-assembly)

      If the result is not as specified, replace the inner belt sub-assembly.