ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the clamp to install the No. 2 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.

   2. Connect the connector.

   3. Return the front floor carpet assembly.

2. INSTALL REAR SEAT CUSHION LOCK HOOK

   Click here

3. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

   Click here

4. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

   Click here