REAR COMBINATION LIGHT ASSEMBLY(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE

  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

    1. E294643

      Engage the 3 guides to temporarily install the rear combination light assembly as shown in the illustration.

    2. Install the rear combination light assembly with the 3 nuts.

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

    3. Engage the 2 clamps.

    4. Connect the 2 connectors.

    5. E294641

      Install the luggage compartment trim cover assembly to the original position as shown in the illustration.

    6. Install the 2 clips.

    7. Remove the protective tape.