FRONT BRAKE DISASSEMBLY

PROCEDURE

1. REMOVE CYLINDER BOOT

   1. 

      Using a screwdriver, remove the cylinder boot from the disc brake cylinder assembly.

      Tip:

      Tape the screwdriver tip before use.

      Note:

      Be careful not to damage the brake piston or cylinder.

2. REMOVE FRONT DISC BRAKE PISTON

   1. 

      Place a piece of cloth between the piston and disc brake cylinder assembly.

   2. Apply compressed air to remove the piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note:

      Do not allow any brake fluid to spatter.

3. REMOVE PISTON SEAL

   1. 

      Using a screwdriver, remove the piston seal from the disc brake cylinder assembly.

      Tip:

      Tape the screwdriver tip before use.

      Note:

      Do not damage the inner surface or piston seal groove of the cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP

5. REMOVE FRONT DISC BRAKE BLEEDER PLUG