EXHAUST GAS TEMPERATURE SENSOR (for DPF) INSTALLATION


  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. B007QWVE01

      Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The sensor has 3 paint marks as shown in the illustration.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. B007QMOE01

      Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The sensor has 2 paint marks as shown in the illustration.

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR

    Note

    If the sensor is dropped, replace it with a new one.


    1. B007P43E01

      Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

      Tech Tips

      The sensor has 1 paint mark as shown in the illustration.

  4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here