REAR SPOILER REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear spoiler removal/installation are shown below.

Necessary Procedures after parts removed / installed / replaced
Replacement Part or Procedure Necessary Procedure Effects / Inoperative when not Performed Link
When the luggage compartment door is opened using a mechanical key Initialize luggage closer motor assembly The power trunk lid does not operate

Click here

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  2. REMOVE SWITCH BEZEL

    Click here

  3. REMOVE NO. 2 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

  4. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  5. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. B006D4H

      Remove the 4 nuts.

    2. B006BQPC02
      B006DHE Protective Tape

      Put protective tape around the rear spoiler sub-assembly.

    3. B006DG4C01
      B006DHE Remove in this Direction

      Detach the clip and remove the rear spoiler sub-assembly.

  6. REMOVE BOLT


    1. Remove the 3 bolt.

      B006DJOC01
      B006DHE Remove in this Direction - -