BACK DOOR THREE-DIMENSIONAL DISTANCE
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
Symbol |
Name |
Hole Diameter mm (in.) |
|---|---|---|
A, a |
Back Door Hinge Installation Hole |
φ16 (0.63) |
B |
Roof Panel Center Mark |
- |
C, c |
Back Door Damper Stay Installation Nut |
M6 (0.24) |
D, d |
Back Door Side Stopper Installation Nut |
M6 (0.24) |
E, e |
Quarter Panel Standard Hole |
φ13 (0.51) |
F, f |
Roof Side Inner Rear Panel Corner |
- |
G, g |
Rear Bumper Reinforcement Installation Nut |
M8 (0.31) |
H, h |
Deck Trim Rear Cover Installation Hole |
φ8.5 (0.33) |
J, j |
Back Door Lock Striker Installation Nut |
M8 (0.31) |
K, k |
Center Floor Panel Reinforcement Standard Hole |
φ10 (0.39) |
L, l |
Center Body Pillar Assembly Mark |
- |
*a |
Distance between points other than those above |
*b |
mm (in.) |