LEXUS PARKING ASSIST-SENSOR SYSTEM(w/o Intelligent Clearance Sonar System) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LEXUS PARKING ASSIST-SENSOR SYSTEM


    1. Customizing with the GTS.

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the LEXUS parking assist-sensor system on.

      4. Turn the GTS on.

      5. Enter the following menus: Body Electrical / IPA/ICS/Clearance Sonar / Utility / Customize Setting.

      6. Select the setting by referring to the table below.


        Warning
        Tester Display Description Default Setting ECU
        Fr Corner Sensor Onset Range Sets the detection operation range for the front corner sensors. Long 0:Short,1:Long Clearance warning ECU assembly
        Rr Corner Sensor Onset Range Sets the detection operation range for the rear corner sensors. Long 0:Short,1:Long Clearance warning ECU assembly
        Fr Sensor Onset Range Sets the detection operation range for the front center sensors. Wide 0:Narrow,1:Wide Clearance warning ECU assembly
        Rr Sensor Onset Range Sets the detection operation range for the rear center sensors. Wide 0:Narrow,1:Wide Clearance warning ECU assembly
        Fr & Rr Buzzer Volume Changes the buzzer volume setting. M 01:L,10:M,11:H Clearance warning ECU assembly
        Clearance Sonar Auto Mute Function Sets the availability of the auto mute function. ON 0:ON,1:OFF Clearance warning ECU assembly
        Clearance Sonar Judgement of Obstacle on Course Sets the availability of judgement of obstacle on course. Valid 0:Valid,1:Invalid Clearance warning ECU assembly

        Sensor
        Tester Display Description Default Setting ECU
        Sensor Condition N Makes the front sensors available when the shift lever is in N. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly

        Display
        Tester Display Description Default Setting ECU
        Approach Display OFF Sets whether the display turns off after an obstacle is no longer detected. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly

        Others
        Tester Display Description Default Setting ECU
        Clearance Sonar Switch State Stored Sets the availability of the clearance sonar switch state stored function. Stored 0:Not Stored,1:Stored Clearance warning ECU assembly

    2. Customizing with multi-information display

      Note


      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.


      1. Turn the engine switch on (IG).

      2. Turn the LEXUS parking assist-sensor system on.

      3. Enter the following menus: Setting / Vehicle Setting / Parking assist.

      4. Select the setting by referring to the table below.

        LEXUS parking Assist-sensor Setting
        Display Description Default Setting ECU
        Volume Sets the buzzer alert volume. 2 1, 2 or 3 Clearance warning ECU assembly