LOWER INSTRUMENT PANEL REASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL ANTENNA CORD SUB-ASSEMBLY

    for LHD:

    Click here

    for RHD:

    Click here

  2. INSTALL PUSH START SWITCH (for RHD with Entry and Start System)

    Click here

  3. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)

    Click here

  4. INSTALL DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)

    Click here

  5. INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/ Power Back Door)

    for LHD:

    Click here

    for RHD:

    Click here

  6. INSTALL DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)

    Click here

  7. INSTALL SPARE SWITCH HOLE COVER

    Tip:

    Use the same procedure for all the spare switch hole covers.

    1. Attach the 2 claws to install the spare switch hole cover.

  8. INSTALL NO. 2 SWITCH HOLE BASE

    1. Attach the claw and 3 clips to install the No. 2 switch hole base.

  9. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

    1. Attach the clip to install the glove compartment door stopper sub-assembly.