PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU), Diagnostic DTC:C1694

DTC Code DTC Name
C1694 Steering Angle Initialization Incomplete

DESCRIPTION

This DTC is stored when the television camera assembly judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1694

Steering Angle Initialization Incomplete

Maximum steering angle has not been memorized (steering angle setting is incomplete)

  • Steering angle setting

  • Television camera assembly

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE

  1. ADJUST SETTINGS (STEERING ANGLE SETTING)

    1. Perform steering angle setting.

      1. Steering angle setting.

        Click here

    Result

    Proceed to

    NEXT
    NEXT

  2. CHECK DTC

    1. Clear the DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Clear DTCs

    2. Check for DTCs.

      Click here

      Chassis > IPA/Parking Assist Monitor > Trouble Codes

      Tip:

      • If DTC C1694 is output, perform the steering angle setting again.

      • If DTC C1694 is still output after performing the steering angle setting 3 times, replace the television camera assembly.

    Result

    Proceed to

    DTC C1694 is not output

    DTC C1694 is output
    DTC C1694 is not output

    END

    DTC C1694 is output

    REPLACE TELEVISION CAMERA ASSEMBLY

    Click hereClick here