VACUUM PUMP(for 1ZR-FAE) INSTALLATION

PROCEDURE

  1. INSTALL VACUUM PUMP ASSEMBLY

    1. C197588C01
      V100135

      Engine Oil

      Apply engine oil to 2 new O-rings and install them to the vacuum pump assembly.

    2. C167170C02

      *a

      Coupling Teeth

      *b

      Groove
      V100135

      Engine Oil

      Apply engine oil to the inner surface of the installation hole.

    3. Install the vacuum pump assembly so that the coupling teeth of the vacuum pump assembly and the groove of the camshaft are engaged.

      Note:

      Ensure that the vacuum pump assembly is installed securely.

    4. C167172

      Install the 3 bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

      Note:

      After tightening the bolts, ensure that the contact surface of the vacuum pump assembly is flush with the cylinder head.

    5. Connect the union to connector tube hose to the vacuum pump assembly and slide the clip to secure it.

  2. CONNECT ENGINE WIRE

    Click here

  3. OPERATION CHECK

    Click here