EGR COOLER COMPONENTS
ILLUSTRATION
*1 |
AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE ASSEMBLY |
*2 |
AIR CLEANER CASE SUB-ASSEMBLY |
*3 |
AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
*4 |
BATTERY |
*5 |
BATTERY BRACKET REINFORCEMENT |
*6 |
BATTERY CARRIER ASSEMBLY |
*7 |
BATTERY CLAMP SUB-ASSEMBLY |
*8 |
BATTERY INSULATOR |
*9 |
BATTERY TRAY |
*10 |
NO. 1 ENGINE COVER |
*11 |
NO. 1 ENGINE UNDER COVER |
*12 |
VACUUM HOSE |
*13 |
NO. 1 FUEL HOSE |
*14 |
NO. 2 FUEL HOSE |
*15 |
VENTILATION HOSE |
*16 |
GROUND WIRE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
COMPRESSOR OUTLET ELBOW |
*2 |
ENGINE WIRE |
*3 |
NO. 1 AIR TUBE ASSEMBLY |
*4 |
NO. 4 WATER BY-PASS HOSE |
*5 |
NO. 1 RADIATOR PIPE |
*6 |
NO. 2 RADIATOR PIPE |
*7 |
OUTLET HEATER WATER HOSE |
*8 |
WATER HOSE SUB-ASSEMBLY |
*9 |
WATER BY-PASS HOSE ASSEMBLY |
*10 |
RADIATOR HOSE SUB-ASSEMBLY |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
ILLUSTRATION
*1 |
EGR COOLER ASSEMBLY WITH EGR VALVE ASSEMBLY |
*2 |
FUEL FEED PIPE SUB-ASSEMBLY |
*3 |
NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
*4 |
NO. 1 TURBO INSULATOR |
*5 |
WIRE HARNESS |
*6 |
GASKET |
*7 |
WATER PIPE |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
*T1 |
1st: 5.0 (51, 44 in.*lbf) 2nd: Loosen 90° 2nd: 13 (133, 10) |
*T2 |
8.0 (82, 71 in.*lbf) Bolt cannot be removed from the intake manifold |
ILLUSTRATION
*1 |
EGR VALVE ASSEMBLY |
*2 |
EGR COOLER HOSE |
*3 |
EGR COOLER ASSEMBLY |
*4 |
GROMMET |
*5 |
GASKET |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |