OIL AND OIL FILTER REPLACEMENT
CAUTION / NOTICE / HINT
Prolonged and repeated contact with engine oil will cause removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Wear protective clothing and gloves. Wash your skin thoroughly with soap and water, or use a waterless hand cleaner to remove any used engine oil. Do not use gasoline, thinners or solvents.
For environmental protection, used oil and used oil filters must be disposed of at designated disposal sites.
DRAIN ENGINE OIL
Remove the oil filler cap.
Remove the oil pan drain plug and gasket, and drain the engine oil into a container.
Clean and install the oil pan drain plug together with a new gasket.
REMOVE OIL FILTER
Using SST, remove the oil filter sub-assembly.
INSTALL OIL FILTER
Check and clean the oil filter sub-assembly installation surface.
Apply clean engine oil to the gasket of a new oil filter sub-assembly.
Lightly screw the oil filter sub-assembly into place by hand. Tighten it until the gasket contacts the seat.
Using SST, tighten the oil filter sub-assembly.
Depending on the work space available, choose from the following:
If enough space is available, use a torque wrench to tighten the oil filter sub-assembly.
If not enough space is available to use a torque wrench, tighten the oil filter sub-assembly 3/4 of a turn by hand or use a common wrench.
ADD ENGINE OIL
Add new engine oil and install the oil filler cap.
Standard Oil Grade
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving" or ILSAC multigrade engine oil
API grade SL, SM or SN multigrade engine oil
Drain and refill without oil filter change
3.9 liters (4.1 US qts, 3.4 Imp. qts)
Drain and refill with oil filter change
4.2 liters (4.4 US qts, 3.7 Imp. qts)
4.7 liters (5.0 US qts, 4.1 Imp. qts)
INSPECT FOR OIL LEAK
Start the engine. Make sure that there are no oil leaks from the areas that were worked on.
INSPECT ENGINE OIL LEVEL