ROOF SUNSHADE SWITCH INSPECTION


  1. INSPECT ROOF SUNSHADE SWITCH (MAP LIGHT ASSEMBLY)


    1. A01NLVEE01
      Text in Illustration
      *1

      Component without harness connected

      (Roof Sunshade Switch (Map Light Assembly))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      T10-38 (CLS) - T10-40 (GND) CLOSE switch is pressed Below 1 Ω
      T10-38 (CLS) - T10-40 (GND) CLOSE switch is not pressed 10 kΩ or higher
      T10-37 (OPN) - T10-40 (GND) OPEN switch is pressed Below 1 Ω
      T10-37 (OPN) - T10-40 (GND) OPEN switch is not pressed 10 kΩ or higher

      If the result is not as specified, the roof sunshade switch (map light assembly) may be malfunctioning.