HARD DISK DRIVE INSTALLATION

PROCEDURE


  1. PRECAUTION

    Note

    When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

  2. INSTALL HARD DISK DRIVE


    1. B007WUDC01
      B007Z37 Install in this Direction

      Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.

    2. Install the cover with the 3 screws.

  3. INSTALL NO. 2 RADIO BRACKET

    Click here

  4. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER

    Click here

  5. INSTALL LOWER INSTRUMENT FINISH PANEL SUB

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT

    Click here

  7. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  8. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  10. INSPECT HARD DISK DRIVE

    Click here