VACUUM WARNING SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CHECK VALVE GROMMET


    1. Install a new check valve grommet to the brake booster assembly.

  2. INSTALL VACUUM WARNING SWITCH ASSEMBLY


    1. B0085OJC01
      *a 30° +/- 20°
      B0086HX Up

      Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

    2. Connect the connector to the vacuum warning switch assembly.

  3. INSTALL BATTERY

    for A25A-FKS: Click here

    for 2GR-FKS: Click here