FUEL SENDER GAUGE ASSEMBLY REMOVAL

PROCEDURE

  1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click hereClick here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY

    1. A354395C01
      V100136

      Push
      V100137

      Pull up

      Disconnect the fuel sender gauge assembly connector.

    2. Disengage the clamp to disconnect the wire harness.

      Note:

      Do not damage the wire harness.

    3. Push the claw (A) of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

      Note:

      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Be careful not to bend the arm of the fuel sender gauge assembly.