HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL

PROCEDURE

  1. REMOVE FRONT WHEEL LH

    Click here

  2. REMOVE FRONT FENDER LINER LH

    Tip:

    Use the same procedure as for the RH side.

    Click here

  3. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

    1. B372162

      Remove the bolt.

    2. B372121

      Disconnect the hood lock control cable assembly from the hood lock assembly.

    3. Using a screwdriver, disengage each clamp and hood cable grommet as shown in the illustration.

      B372163C01

      *1

      Hood Lock Control Cable Assembly

      -

      -

      *a

      Clamp

      *b

      Hood Cable Grommet
      Tip:

      Tape the screwdriver tip before use.

    4. Pull the hood lock control cable assembly from the cabin and remove it.