HOOD LOCK CONTROL CABLE ASSEMBLY(for Hatchback, Wagon) REMOVAL

PROCEDURE

  1. REMOVE FRONT WHEEL LH (for LHD)

  2. REMOVE FRONT FENDER MUDGUARD LH (for LHD)

    1. w/ Mudguard:

      Click here

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)

    Tip:

    Use the same procedure for the RH side and LH side.

    Click here

  4. REMOVE FRONT FENDER LINER LH (for LHD)

    Tip:

    Use the same procedure for the RH side and LH side.

    Click here

  5. REMOVE FRONT WHEEL RH (for RHD)

  6. REMOVE FRONT FENDER MUDGUARD RH (for RHD)

    1. w/ Mudguard:

      Tip:

      Use the same procedure for the RH side and LH side.

      Click here

  7. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

  8. REMOVE FRONT FENDER LINER RH (for RHD)

  9. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

  10. REMOVE COWL SIDE TRIM BOARD LH (for LHD)

  11. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    1. w/ Instrument Panel Under Cover:

      Click hereClick here

  12. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

    Tip:

    Use the same procedure for the RH side and LH side.

    Click hereClick here

  13. REMOVE COWL SIDE TRIM BOARD RH (for RHD)

    Tip:

    Use the same procedure for the RH side and LH side.

    Click hereClick here

  14. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    1. w/ Instrument Panel Under Cover:

      Tip:

      Use the same procedure for the RH side and LH side.

      Click hereClick here

  15. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

  16. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

    1. B324722

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  17. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

    1. B332347

      Disconnect the hood lock control cable assembly.

    2. Using a screwdriver, disengage the 4 clamps and hood cable grommet as shown in the illustration.

      B332362C01

      *1

      Hood Lock Control Cable

      -

      -

      *a

      Clamp

      *b

      Hood Cable Grommet

      Tip:

      Tape the screwdriver tip before use.

    3. Pull the hood lock control cable assembly from the engine compartment and remove it.

  18. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

    1. B324723

      Disconnect the hood lock control cable assembly.

    2. Using a screwdriver, disengage 4 clamps and hood cable grommet as shown in the illustration.

      B332360C01

      *1

      Hood Lock Control Cable

      -

      -

      *a

      Clamp

      *b

      Hood Lock Control Cable Clamp

      Tip:

      Tape the screwdriver tip before use.

    3. Pull the hood lock control cable assembly from the engine compartment and remove it.