ENGINE COMPARTMENT THREE-DIMENSIONAL DISTANCE
Point F, f on the vehicle are asymmetrical.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
Symbol |
Name |
Hole Diameter mm (in.) |
|---|---|---|
A, a |
Front Fender Installation Nut |
M6 (0.24) |
B, b |
Front Suspension Installation Hole |
φ12.5 (0.49) |
C, c |
Hood Hinge Installation Nut |
M8 (0.31) |
d |
Cowl Top Outer Panel Center |
- |
E, e |
Front Side Member Standard Hole |
φ15 (0.59) |
F |
Front Side Member Standard Hole |
φ13 (0.51) |
f |
Engine Mounting Bracket Installation Nut |
M10 (0.39) |
G, g |
Radiator Upper Support Installation Nut |
M6 (0.24) |
H, h |
Front Bumper Reinforcement Installation Nut |
M10 (0.39) |
J |
Hood Lock Support Brace Installation Nut |
M6 (0.24) |
K, k |
Front Fender Extension Standard Hole |
φ10 (0.39) |
L, l |
Radiator Upper Support Installation Nut |
M6 (0.24) |
M, m |
Radiator Upper Support Standard Hole |
φ10 (0.39) |
*a |
Distance between points other than those above |
*b |
Height from Imaginary Datum Line |
*c |
mm (in.) |
- |
- |