OIL PUMP COMPONENTS
ILLUSTRATION
*1 |
FUEL DELIVERY PIPE SUB-ASSEMBLY |
*2 |
FUEL INJECTOR ASSEMBLY |
*3 |
FUEL TUBE SUB-ASSEMBLY |
*4 |
THROTTLE BODY ASSEMBLY |
*5 |
VACUUM SURGE TANK |
*6 |
GASKET |
*7 |
NO. 1 DELIVERY PIPE SPACER |
*8 |
O-RING |
*9 |
INJECTOR VIBRATION INSULATOR |
*10 |
NO. 2 FUEL PIPE CLAMP |
*a |
for Type A |
*b |
for Type B |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
ENGINE OIL LEVEL DIPSTICK GUIDE |
*2 |
EXHAUST MANIFOLD |
*3 |
IGNITION COIL ASSEMBLY |
*4 |
INTAKE MANIFOLD |
*5 |
MANIFOLD STAY |
*6 |
NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
*7 |
NO. 1 WATER BY-PASS PIPE |
*8 |
NO. 3 WATER BY-PASS HOSE |
*9 |
PCV HOSE |
*10 |
WATER BY-PASS HOSE |
*11 |
WATER INLET HOSE |
*12 |
GASKET |
*13 |
ENGINE OIL LEVEL DIPSTICK |
*14 |
AIR TUBE |
*15 |
O-RING |
*16 |
INTAKE MANIFOLD STAY |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
CYLINDER HEAD COVER GASKET |
*2 |
CYLINDER HEAD COVER SUB-ASSEMBLY |
*3 |
SEAL WASHER |
*4 |
GASKET |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*A |
for Oil Filter Sub-assembly Type |
*B |
for Oil Filter Element Kit Type |
*1 |
CRANKSHAFT PULLEY |
*2 |
ENGINE MOUNTING BRACKET STUD BOLT |
*3 |
NO. 1 CHAIN TENSIONER ASSEMBLY |
*4 |
THERMOSTAT |
*5 |
TIMING CHAIN COVER OIL SEAL |
*6 |
TIMING CHAIN COVER SUB-ASSEMBLY |
*7 |
WATER INLET |
*8 |
OIL FILTER BRACKET |
*9 |
OIL FILTER SUB-ASSEMBLY |
*10 |
OIL FILTER CAP ASSEMBLY |
*11 |
OIL FILTER ELEMENT |
*12 |
ENGINE WATER PUMP ASSEMBLY |
*13 |
ENGINE MOUNTING BRACKET RH |
*14 |
BRACKET |
*15 |
SEAL WASHER |
*16 |
O-RING |
*17 |
GASKET |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
 |
MP grease |
★ |
Precoated part |
ILLUSTRATION
*1 |
CHAIN SUB-ASSEMBLY |
*2 |
CHAIN TENSIONER SLIPPER |
*3 |
CRANKSHAFT TIMING SPROCKET |
*4 |
NO. 1 CHAIN VIBRATION DAMPER |
*5 |
NO. 2 CHAIN SUB-ASSEMBLY |
*6 |
NO. 2 CHAIN VIBRATION DAMPER |
*7 |
NO. 2 OIL PAN SUB-ASSEMBLY |
*8 |
OIL PUMP ASSEMBLY |
*9 |
O-RING |
*10 |
OIL PUMP DRIVE GEAR |
*11 |
OIL PUMP DRIVE SHAFT GEAR |
*12 |
CHAIN DAMPER SPRING |
*13 |
CHAIN TENSIONER PLATE |
*14 |
GASKET |
*15 |
OIL PAN DRAIN PLUG |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
ILLUSTRATION
*1 |
OIL PUMP COVER SUB-ASSEMBLY |
*2 |
OIL PUMP RELIEF VALVE |
*3 |
OIL PUMP BODY |
*4 |
OIL PUMP DRIVEN ROTOR |
*5 |
OIL PUMP DRIVE ROTOR |
*6 |
OIL PUMP RELIEF VALVE SPRING |
*7 |
OIL PUMP RELIEF VALVE PLUG |
- |
- |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
- |
- |