REAR SEAT ASSEMBLY(for Sedan) REASSEMBLY

PROCEDURE

  1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER

    1. Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.

    2. Using hog ring pliers, install 12 new hog rings.

      B350726
      Note:

      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

    3. Using hog ring pliers, install the bench type rear seat cushion cover with 27 new hog rings.

      B350724
      Note:

      • Be careful not to damage the bench type rear seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the bench type rear seat cushion cover.

  2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)

    1. B350710

      Install the rear seatback lock assembly RH with the 2 nuts.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

  3. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (for RH Side)

    1. Temporarily install the separate type rear seatback cover RH to the separate type rear seatback pad RH.

    2. w/o Center Armrest:

      1. B350708

        Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 11 new hog rings.

        Note:

        • Be careful not to damage the separate type rear seatback cover RH.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

    3. w/ Center Armrest:

      1. B350706

        Using hog ring pliers, install the separate type rear seatback cover RH to the separate type rear seatback pad RH with 17 new hog rings.

        Note:

        • Be careful not to damage the separate type rear seatback cover RH.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

  4. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

    1. Temporarily install the seatback cover with pad to the rear seatback frame sub-assembly.

    2. B350703

      Engage the 4 claws to install the 2 rear seat center headrest supports.

    3. B350702

      Engage the 4 claws to install the 2 rear seat headrest supports.

    4. B350704

      Using hog ring pliers, install 7 new hog rings.

      Note:

      • Be careful not to damage the separate type rear seatback cover with pad.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover with pad.

    5. B350701

      Close the fastener as shown in the illustration.

    6. B350699

      Engage the 4 fasteners as shown in the illustration.

    7. B350697

      Install the separate type rear seatback cover with pad with the 3 clips.

  5. INSTALL REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)

    1. B350696

      Engage the guide.

    2. Install the rear seat shoulder belt guide RH with the screw.

  6. INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)

    1. B350695

      Engage the guide.

    2. Install the rear seat center shoulder belt guide with the screw.

  7. INSTALL REAR SEATBACK LOCK RELEASE BUTTON (for RH Side)

    1. B350694

      Install the rear seatback lock release button as shown in the illustration.

  8. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for RH Side)

    1. w/ Center Armrest:

      1. B352733

        Install the bush as shown in the illustration.

      2. B350692N01

        Engage the guide as indicated by the arrows, in the order shown in the illustration.

      3. B350580

        Install the rear seat center armrest assembly with the bush and bolt.

        6.0 N*m

        61 kgf*cm

        53 in.*lbf

  9. INSTALL CENTER ARMREST HINGE COVER (for RH Side)

    1. B333496

      w/ Center Armrest:

      1. Engage the claw to install the center armrest hinge cover as shown in the illustration.

  10. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)

    1. B350723

      Install the rear seatback lock assembly LH with the 2 nuts.

      31 N*m

      316 kgf*cm

      23 ft.*lbf

  11. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (for LH Side)

    1. Temporarily install the separate type rear seatback cover LH to the separate type rear seatback pad LH.

    2. B352735

      Using hog ring pliers, install the separate type rear seatback cover LH to the separate type rear seatback pad LH with 7 new hog rings.

      Note:

      • Be careful not to damage the separate type rear seatback cover LH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

  12. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

    1. Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly.

    2. B350720

      Engage the 4 claws to install the 2 rear seat headrest supports.

    3. B350721

      Using hog ring pliers, install 6 new hog rings.

      Note:

      • Be careful not to damage the separate type rear seatback cover with pad.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover with pad.

    4. B350718

      Close the fastener as shown in the illustration.

    5. B350717

      Engage the 4 fasteners as shown in the illustration.

    6. B350715

      Install the separate type rear seatback cover with pad with the 2 clips.

  13. INSTALL REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)

    1. B350711

      Engage the guide.

    2. Install the rear seat shoulder belt guide LH with the screw.

  14. INSTALL REAR SEATBACK STOP BUTTON GROMMET (for LH Side)

    1. B350714

      Engage the 2 claws to install the rear seatback stop button grommet.

  15. INSTALL REAR SEATBACK LOCK RELEASE BUTTON (for LH Side)

    1. B350713

      Install the rear seatback lock release button as shown in the illustration.