INTAKE SYSTEM ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the air leaks from intake system removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Air leaks from intake system Inspection after repair Poor idle, engine start, etc.

Click here

CAUTION:

To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.

B00697X

PROCEDURE


  1. INSPECT INTAKE SYSTEM

    CAUTION:

    To prevent injury due to contact with an operating fan and generator V-belt or cooling fan, keep your hands and clothing away from the fan and generator V-belt and cooling fans when working in the engine compartment with the engine running.

    Tech Tips

    Perform "Inspection After Repair" after repairing air leaks in the intake system.

    Click here


    1. for RHD:

      Check that there is no air suction at the points shown in the illustration.

      A01LDG9C01
      *A w/ Secondary Air Injection System - -

    2. for LHD:

      Check that there is no air suction at the points shown in the illustration.

      A01L8EQC02
      *A w/ Secondary Air Injection System - -