EXHAUST MANIFOLD REMOVAL

PROCEDURE

1. REMOVE NO. 2 CYLINDER HEAD COVER

   Click here

2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

   Click here

3. REMOVE WIRE HARNESS CLAMP BRACKET

   1. 

      Detach the clamp and disconnect the fuel hose.

   2. Remove the bolt and wire harness clamp bracket.

4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

   1. 

      Remove the 3 bolts and No. 1 exhaust manifold heat insulator.

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY

   1. 

      Remove the 2 bolts and disconnect the front exhaust pipe assembly from the center exhaust pipe assembly.

   2. 

      Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.

   3. Remove the gasket from the front exhaust pipe assembly.

   4. Remove the gasket from the exhaust manifold.

6. REMOVE MANIFOLD STAY

   1. 

      Remove the 3 bolts and manifold stay.

7. REMOVE EXHAUST MANIFOLD

   1. 

      Remove the 5 nuts and exhaust manifold.

   2. Remove the exhaust manifold gasket from the cylinder head.

8. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

   1. 

      Remove the 3 bolts and No. 2 exhaust manifold heat insulator.