COMPRESSOR(for V35A-FTS AWD) COMPONENTS
ILLUSTRATION
| *1 | LOWER RADIATOR AIR DEFLECTOR | *2 | RADIATOR COVER PLATE |
| *3 | UPPER RADIATOR SUPPORT SEAL | *4 | V-BANK COVER SUB-ASSEMBLY |
ILLUSTRATION
| *1 | ENGINE UNDER COVER BRACKET RH | *2 | FAN AND GENERATOR V BELT |
| *3 | FRONT SUSPENSION MEMBER BRACE | *4 | NO. 1 ENGINE UNDER COVER ASSEMBLY |
| *5 | STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | AIR CLEANER WITH ELEMENT ASSEMBLY LH | *2 | AIR CLEANER WITH ELEMENT ASSEMBLY RH |
| *3 | INTERCOOLER COOLING WATER INLET HOSE | *4 | INTERCOOLER RESERVE TANK ASSEMBLY |
| *5 | RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY LH | *6 | RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY RH |
| *7 | WATER PUMP BRACKET SUB-ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CLEANER SUPPORT BRACKET ASSEMBLY | *2 | NO. 13 CONNECTOR HOLDER |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | NO. 2 AIR TUBE ASSEMBLY | *2 | THROTTLE BODY WITH MOTOR ASSEMBLY |
| *3 | ENGINE WIRE | *4 | NO. 4 WATER BY-PASS HOSE |
| *5 | NO. 6 WATER BY-PASS HOSE | *6 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | COMPRESSOR ASSEMBLY WITH PULLEY | *2 | DISCHARGE HOSE SUB-ASSEMBLY |
| *3 | SUCTION HOSE SUB-ASSEMBLY | *4 | AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
| *5 | OIL FILTER BRACKET | *6 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with union nut wrench and SST |
| ● | Non-reusable part |  |
for HFC-134a (R134a): Compressor oil ND-OIL 8 or equivalent for HFO-1234yf (R1234yf): Compressor oil ND-OIL 12 or equivalent |