CYLINDER BLOCK COMPONENTS
ILLUSTRATION
*1 |
CYLINDER BLOCK SUB-ASSEMBLY |
*2 |
NO. 1 OIL NOZZLE SUB-ASSEMBLY |
*3 |
NO. 1 TAPER SCREW PLUG |
*4 |
NO. 1 VENTILATION CASE |
*5 |
STRAIGHT PIN |
*6 |
RING PIN |
*a |
for Type A |
*b |
for Type B |
 |
Specified torque: N*m (kgf*cm, ft.*lbf) |
★ |
Precoated part |
ILLUSTRATION
*1 |
CONNECTING ROD BEARING |
*2 |
CONNECTING ROD SMALL END BUSH |
*3 |
CRANKSHAFT |
*4 |
CRANKSHAFT BEARING |
*5 |
PISTON |
*6 |
PISTON RING SET |
*7 |
UPPER CRANKSHAFT THRUST WASHER |
*8 |
NO. 1 COMPRESSION RING |
*9 |
NO. 2 COMPRESSION RING |
*10 |
OIL RING |
*11 |
OIL RING EXPANDER |
*12 |
PISTON PIN HOLE SNAP RING |
*13 |
PISTON PIN |
*14 |
CONNECTING ROD |
*15 |
CONNECTING ROD CAP |
*16 |
CRANKSHAFT BEARING CAP |
|
Specified torque: N*m (kgf*cm, ft.*lbf) |
● |
Non-reusable part |
*T1 |
1st: 40 (408, 30) 2nd: Turn 90° |
*T2 |
1st: 20 (204, 15) 2nd: Turn 90° |