INSPECT TIRE
Measure the tires for wear and proper inflation pressure.
| Standard Cold Tire Inflation Pressure (unloaded vehicle) | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2WD | |||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
| Standard Cold Tire Inflation Pressure (unloaded vehicle) | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4WD and Pre-Runner | |||||||||||||||||||||||||||||||||||||||||||||
|
*1: for European Models
*2: for 1KD (DLX grade) European Models
Using a dial indicator, measure the tire runout.
| Maximum tire runout |
|---|
| 3.0 mm (0.118 in.) |
ROTATE TIRE
| *a | Front of the Vehicle |
| *b | Vehicle Wheels and Spare Tire Wheel are Same Type |
| *c | Vehicle Wheels are Aluminum but Spare Tire Wheel is Steel |
Rotate the tires as shown in the illustration.
INSPECT WHEEL BALANCE
Check and adjust the off-the-car balance.
| Tire Size | Standard Imbalance after Adjustment |
|---|---|
| 205R16C 8PR 110/108S | 14 g (0.033 lb) or less |
| 205/70R15C 8PR 106/104S | |
| 215/65R16C 6PR 106/104S | |
| 255/70R15C 112/110S | |
| 265/65R17 112S | 13 g (0.029 lb) or less |
| 225/70R17C 108/106S |
Tech Tips
The inner and outer side balance weights should be installed by clipping them to the rim.
If necessary, check and adjust the on-the-car balance.
INSPECT FRONT AXLE HUB BEARING LOOSENESS
for 2WD: Click here
for 4WD and Pre-Runner: Click here
INSPECT FRONT AXLE HUB RUNOUT
for 2WD: Click here
for 4WD and Pre-Runner: Click here
INSPECT REAR AXLE SHAFT