POWER STEERING ECU INSTALLATION

PROCEDURE

  1. INSTALL POWER STEERING ECU ASSEMBLY

    1. C302465

      Install the power steering ECU assembly to the power steering ECU bracket with the 2 nuts.

      8.0 N*m

      82 kgf*cm

      71 in.*lbf

  2. INSTALL POWER STEERING ECU WITH BRACKET ASSEMBLY

    1. C302464

      Install the power steering ECU with bracket assembly to the steering column assembly with the 2 bolts.

      12.5 N*m

      127 kgf*cm

      9 ft.*lbf

    2. C302463

      Engage the wire harness clamp to the power steering ECU bracket.

    3. Connect the 4 connectors to the power steering ECU assembly.

    4. C302462

      Engage the 2 wire harness clamps to the power steering ECU bracket.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  5. TORQUE SENSOR ZERO POINT CALIBRATION

    Click here

  6. ASSIST MAP WRITING

    Click here