REAR AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE BRAKE SHOE HOLD DOWN SPRING (for Front Side)

   Click here

2. REMOVE REAR AXLE HUB BOLT

   
   

   1. 

      Pull the No. 1 parking brake shoe assembly towards the front of the vehicle by hand as shown in the illustration.

   2. 

      Text in Illustration

      *1	Service Nut

      Temporarily install 2 service nuts to the rear axle hub bolts as shown in the illustration.

      Recommended service nut
      Thread diameter: 12.0 mm (0.472 in.)
      Thread pitch: 1.5 mm (0.0591 in.)

      Note

      Install the service nuts to prevent damage to the rear axle hub bolts.

   3. Using SST and a screwdriver or an equivalent tool to hold the rear axle hub and bearing assembly, remove the rear axle hub bolt.

      SST

      09611-12010

      Note

      Do not damage the threads of the rear axle hub bolts.

3. INSTALL REAR AXLE HUB BOLT

   
   
   1. 

      Text in Illustration

      *1	Service Nut
      *2	Washer

      Temporarily install a new rear axle hub bolt to the rear axle hub and bearing assembly.

   2. Install a washer and service nut to the new rear axle hub bolt as shown in the illustration.

      Recommended service nut
      Thread diameter: 12.0 mm (0.472 in.)
      Thread pitch: 1.5 mm (0.0591 in.)

      Tech Tips

      Recommended washer thickness is 5 mm (0.197 in.) or more.

   3. Using a screwdriver or an equivalent tool to hold the rear axle hub and bearing assembly, install the rear axle hub bolt by tightening the service nut.

      Note

      
      

      • Install the service nuts to prevent damage to the rear axle hub bolts.

      • Do not damage the threads of the rear axle hub bolts.

   4. Remove the 3 service nuts and washer from the 3 rear axle hub bolts.

   5. Install the No. 1 parking brake shoe assembly.

4. INSTALL BRAKE SHOE HOLD DOWN SPRING (for Front Side)

   Click here