TAIL AND STOP LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RH and LH sides.

  • The procedure listed below is for LH side.

PROCEDURE


  1. DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

    Click here

  2. REMOVE REAR COMBINATION LIGHT LENS LH (for Deck-less)

    Click here

  3. REMOVE REAR COMBINATION LIGHT LENS RH (for Deck-less)

    Click here

  4. REMOVE TAIL AND STOP LIGHT BULB


    1. A01LE1YC01
      *a Matchmark
      *b Unlock Position Mark
      B0069FO Counterclockwise

      w/ Deck:


      1. Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

      2. A01LADRC01
        B0069FO Push in this Direction
        B0068NX Counterclockwise
        A01LA3O Remove in this Direction

        Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.

    2. A01L9EJC01
      B0069FO Push in this Direction
      B0068NX Counterclockwise
      A01LA3O Remove in this Direction

      for Deck-less:

      Push the tail and stop light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.

  5. INSTALL TAIL AND STOP LIGHT BULB


    1. A01L9P5C02
      *a Upper Protrusion
      *b Lower Protrusion
      B006964 Long Cutout
      B0069AV Short Cutout

      w/ Deck:


      1. Align the upper protrusion of the tail and stop light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb.

      2. A01LCLHC01
        B0069FO Push in this Direction
        B0068NX Clockwise

        While pushing the tail and stop light bulb, turn the bulb clockwise to install the bulb.

      3. A01L9VKC01
        *a Matchmark
        *b Unlock Position Mark
        *c Lock Position Mark
        B0069FO Clockwise

        Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

    2. for Deck-less:


      1. A01LCR3C02
        *a Upper Protrusion
        *b Lower Protrusion
        B006964 Long Cutout
        B0069AV Short Cutout

        Align the upper protrusion of the tail and stop light bulb with the short cutout of the rear combination light body and the lower protrusion with the long cutout, and then insert the bulb to the rear combination light body.

      2. A01LAW8C01
        B0069FO Push in this Direction
        B0068NX Clockwise

        While pushing the tail and stop light bulb, turn the bulb clockwise to install the bulb.

  6. CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Deck)

    Click here

  7. INSTALL REAR COMBINATION LIGHT LENS LH (for Deck-less)

    Click here

  8. INSTALL REAR COMBINATION LIGHT LENS RH (for Deck-less)

    Click here