FRONT BLOWER MOTOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. B006CKYC01
      B006AHR Screw
      B006EC9 Connector

      Disconnect the connector.

    2. Remove the 3 screws.

      Note


      • Support the blower motor with fan sub-assembly so that it does not drop when performing this procedure.

      • Do not drop or subject the parts to any impact.

    3. B006B5JC01
      B006DHE Remove in this Direction

      Remove the blower motor with fan sub-assembly as shown in the illustration.

      Note

      Make sure there is no interference with the fan as it will impact the cooling performance.

  4. REMOVE NO. 2 COOLING UNIT PACKING


    1. B0069YAC01
      *1 No. 2 Cooling Unit Packing

      When reusing the blower motor with fan sub-assembly:


      1. Remove the No. 2 cooling unit packing from the blower motor with fan sub-assembly.