CLUTCH UNIT(for MA) REMOVAL

PROCEDURE

  1. REMOVE MANUAL TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

    1. C306184

      Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transaxle assembly.

  3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

    1. C304969

      Remove the clutch release bearing assembly from the clutch release fork sub-assembly.

  4. REMOVE CLUTCH RELEASE FORK BOOT

    1. C304531

      Remove the clutch release fork boot from the manual transaxle assembly.

  5. REMOVE CLUTCH COVER ASSEMBLY

    1. C304536C01

      *a

      Matchmark

      Put matchmarks on the clutch cover assembly and flywheel sub-assembly.

    2. Loosen each bolt 360° at a time until the spring tension is released.

    3. Remove the 6 bolts and clutch cover assembly.

      Note:

      Do not drop the clutch disc assembly.

  6. REMOVE CLUTCH DISC ASSEMBLY

    1. Remove the clutch disc assembly.

      Note:

      Keep the lined part of the clutch disc assembly, the pressure plate, and the surface of the flywheel sub-assembly away from oil and foreign matter.