PRE-COLLISION SYSTEM DETAILS INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY

  1. FUNCTION

    1. The combination meter assembly uses the PCS activation indicator, PCS warning light and buzzer to provide the driver with pre-collision system warnings and indications.

    2. If the pre-collision city sensor determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the PCS activation indicator and buzzer. Details are indicated below.

      Table 1. When there is a high possibility of a collision

      PCS Activation Indicator

      Buzzer

      Flashes Quickly

      Sounds Continuously

    3. When the system is not available, the following warning occurs to warn the driver.

      Table 2. When a system malfunction is detected

      Detail

      PCS Warning Light

      Buzzer

      When the pre-collision city sensor detects a system malfunction.

      Flashes

      Sounds

      This message appears when the pre-collision city sensor determines either of the following conditions is present:

      • Dirty pre-collision city sensor or windshield

      • Poor weather conditions

      • Temperature of pre-collision city sensor is Abnormal

      After these conditions have been resolved, the system will operate normally.

      Illuminates

      -
      Table 3. When the pre-collision system cancel switch is pressed

      Detail

      PCS Warning Light

      Buzzer

      Pre-collision system operation is disabled.

      Illuminates

      -
      Table 4. When the VSC OFF switch is pressed

      Detail

      PCS Warning light

      Buzzer

      Pre-collision brake and pre-collision brake assist operation is disabled (the warning for when there is a high possibility of a collision is still enabled).

      Illuminates

      -