1AD-FTV LUBRICATION SERVICE DATA

Table 1. Oil Pressure

Condition

Specified Condition

Idling

50 kPa (0.5 kgf/cm2, 7.3 psi) or higher

2500 rpm

200 kPa (2.0 kgf/cm2, 29 psi) or higher

3500 rpm

250 kPa (2.5 kgf/cm2, 36 psi) or higher
Table 2. Oil Pressure Switching Valve

Tester Condition

Condition

Specified Condition

1 - 2

20°C (68°F)

13 to 17 Ω
Table 3. Standard Oil Grade

Oil Grade

Oil Viscosity (SAE)

ACEA C2

  • 0W-30

  • 5W-30
Table 4. Standard Capacity

Item

Specified Condition

Drain and refill with oil filter change

5.5 liters (5.8 US qts, 4.8 Imp. qts)

Drain and refill without oil filter change

5.9 liters (6.2 US qts, 5.2 Imp. qts)

Dry fill

6.7 liters (7.1 US qts, 5.9 Imp. qts)
Table 5. Engine Oil Level Sensor

Tester Condition

Condition

Specified Condition

1 - 2

on

Below 0.5 mΩ

off

1 MΩ or higher
Table 6. Oil Pump

Item

Condition

Specified Condition

Oil pump rotor

Standard side clearance

0.03 to 0.09 mm (0.00118 to 0.00354 in.)

Maximum side clearance

0.090 mm (0.00354 in.)

Standard tip clearance

0.180 to 0.300 mm (0.00709 to 0.0118 in.)

Maximum tip clearance

0.300 mm (0.0118 in.)

Standard body clearance

0.175 to 0.250 mm (0.00689 to 0.00984 in.)

Maximum body clearance

0.250 mm (0.00984 in.)