CYLINDER HEAD GASKET REMOVAL

PROCEDURE

  1. REMOVE CAMSHAFT

    Click here

  2. REMOVE EXHAUST MANIFOLD AND TURBOCHARGER SUB-ASSEMBLY

    Click here

  3. REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

    Click here

  4. REMOVE FUEL INJECTOR SEAL

    Click here

  5. REMOVE NO. 1 GLOW PLUG CONNECTOR

    Click here

  6. REMOVE GLOW PLUG ASSEMBLY

    Click here

  7. REMOVE CYLINDER HEAD SUB-ASSEMBLY

    1. A293311N01

      Uniformly loosen the 10 cylinder head set bolts in several steps, in the order shown in the illustration.

    2. Remove the 10 cylinder head set bolts and plate washers.

      Note:

      Head warpage or cracking could result from removing bolts in the incorrect order.

  8. REMOVE CYLINDER HEAD GASKET

    1. Remove the cylinder head gasket.