CAMSHAFT OIL CONTROL VALVE(for Intake Side) ON-VEHICLE INSPECTION

PROCEDURE

  1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

    Click here

  2. INSPECT CAMSHAFT TIMING GEAR BOLT

    1. A355357C02

      *a

      Plunger

      Check the stroke of the plunger in the center of the camshaft timing gear bolt.

      Standard Stroke

      4.5 mm (0.177 in.) or more

      Tip:

      When pressing the plunger, there may be a stepped feeling. This is not a malfunction.

      If the result is not as specified, replace the camshaft timing gear bolt.

  3. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

    Click here