COMPRESSOR(for V35A-FTS 2WD) INSPECTION

PROCEDURE


  1. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY


    1. B0069OWC06
      *a

      Component without harness connected

      (Compressor Assembly with Pulley (Compressor Solenoid))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      D33-1 (SOL-) - D33-2 (SOL+) 25°C (77°F) 10.1 to 11.1 Ω

      If the result is not as specified, there may be a malfunction in the compressor assembly with pulley.