NAME PLATE ATTACHMENT POSITION

  1. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.

    Tip:

    Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.

  2. Wipe off the remaining double-sided tape using a clean cloth or equivalent.

    Note:

    If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.

  3. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.

    Tip:

    The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.

B458849C01

*1

NO. 1 BACK DOOR EMBLEM

*2

NO. 1 BACK DOOR NAME PLATE

*3

NO. 2 BACK DOOR NAME PLATE

*4

NO. 3 BACK DOOR NAME PLATE

●

Non-reusable part

-

-
B458850C01

*A

for LH Side

*B

for RH Side

*1

SIDE PANEL EMBLEM

-

-

●

Non-reusable part

-

-

  1. SIDE PANEL EMBLEM

    1. for LH Side:

      B458891C01

      *a

      Reference Values

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      85.5 mm (3.37 in.)

      B

      42.8 mm (1.69 in.)

      C

      62.6 mm (2.46 in.)

      D

      195.5 mm (7.70 in.)

    2. for RH Side:

      B458892C01

      *a

      Reference Values

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      90.6 mm (3.57 in.)

      B

      45.9 mm (1.807 in.)

      C

      55.8 mm (2.20 in.)

      D

      190.4 mm (7.50 in.)

  2. NO. 1 BACK DOOR EMBLEM

    B458672C01

    *a

    Location Pin

  3. NO. 1 BACK DOOR NAME PLATE

    B458673C01

    *a

    Reference Values

    -

    -

    Standard Measurement

    Area

    Measurement

    Area

    Measurement

    A

    57.0 mm (2.24 in.)

    B

    85.5 mm (3.37 in.)

    C

    83.2 mm (3.28 in.)

    -

    -

  4. NO. 2 BACK DOOR NAME PLATE

    B458675C01

    *a

    Reference Values

    -

    -

    Standard Measurement

    Area

    Measurement

    Area

    Measurement

    A

    65.1 mm (2.56 in.)

    B

    113.7 mm (4.48 in.)

  5. NO. 3 BACK DOOR NAME PLATE

    B458890C01

    *a

    Reference Values

    -

    -

    Standard Measurement

    Area

    Measurement

    Area

    Measurement

    A

    115.8 mm (4.56 in.)

    B

    78.9 mm (3.106 in.)

    C

    74.3 mm (2.93 in.)

    D

    191.4 mm (7.54 in.)