SIDE STEP INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. INSTALL SIDE STEP ASSEMBLY LH

    1. Attach the 6 clips to install the side step.

    2. Install the 3 screws.

    3. Using a T30 "TORX" socket wrench, install the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

    4. Install the side step with the 6 bolts.

      18 N*m

      184 kgf*cm

      13 ft.*lbf

    5. Connect the connector.

    6. Attach the clamp.