REMOTE TOUCH REASSEMBLY

CAUTION / NOTICE / HINT

Note

When reassembling the remote touch assembly, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

PROCEDURE


  1. INSTALL REMOTE OPERATION BOARD (for Radio and Display Type with 8 Inch Display)


    1. A01RANG

      Engage the 2 guides.

    2. Install the remote operation board to the upper rear console panel with the 4 screws.

  2. INSTALL REMOTE OPERATION BOARD (except Radio and Display Type with 8 Inch Display)


    1. Connect the connector.

    2. A01RF0P

      Engage the 6 clamps to install the switch wire to the remote operation board.

    3. A01R9W7

      Connect the connector.

    4. A01R98W

      Install the remote operation board to the remote operation switch with the 4 screws.

  3. INSTALL SWITCH KNOB (except Radio and Display Type with 8 Inch Display)


    1. A01RFT1C01
      B007Z37 Install in this Direction

      Install the switch knob as shown in the illustration.