ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE MAIN BODY ECU (for RHD)

    Click here

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  3. REMOVE ACCELERATOR PEDAL PAD


    1. B006A39

      Detach the 4 claws to remove the accelerator pedal pad.

  4. REMOVE ACCELERATOR PEDAL


    1. B0069KA

      Remove the 2 bolts and accelerator pedal.

  5. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid excessive force to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. B006C4F

      Remove the 3 nuts and accelerator pedal sensor assembly.

      Note


      • Do not drop the accelerator pedal sensor assembly, strike it with tools or subject it to impact.

      • If the accelerator pedal sensor assembly is subjected to an impact, replace it with a new one.

    2. Disconnect the connector.