TEMPERATURE SWITCH INSTALLATION

PROCEDURE

  1. INSTALL TEMPERATURE SWITCH

    1. Using a 19 mm union nut wrench, install a new temperature switch.

      7.4 N*m

      75 kgf*cm

      65 in.*lbf

      Note:

      Do not apply any excessive force to the pipe when installing the temperature switch.

    2. Connect the temperature switch connector.

  2. INSTALL NO. 1 ENGINE COVER

  3. ADD ENGINE COOLANT

  4. INSPECT FOR COOLANT LEAK

  5. INSTALL NO. 1 ENGINE UNDER COVER (for Half Cover Type)

  6. INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)