DIESEL THROTTLE BODY (w/o EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 2 AIR CLEANER PIPE SUB-ASSEMBLY

    A01E0K7

    1. Disconnect the manifold absolute pressure sensor connector.

    2. Disconnect the vacuum hose from the gas filter.

    3. Loosen the 2 clamps.

    4. Remove the bolt and disconnect the pipe together with the 2 air hoses.

  3. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01DZU2

      Disconnect the 2 connectors.

    2. A01E2KU

      Remove the 2 bolts, 2 nuts, throttle body and gasket.