LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) CUSTOMIZE PARAMETERS

  1. CUSTOMIZE LANE DEPARTURE ALERT SYSTEM (w/ Steering Control)

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tip:

    The following items can be customized.

    1. Customizing with the Multi-information display

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup

      3. Select the setting by referring to the table below.

      4. Change the settings of the lane departure alert using the steering pad switch assembly.

        Table 1. Lane Departure Alert

        Display

        Content

        Setting

        Default

        Steering Assist

        Steering assist function

        On/Off

        On

        Warning Sensitivity

        Timing of lane departure warning

        High/Standard

        Standard

        Vehicle Sway Warning

        Vehicle sway warning function

        On/Off

        On

        Sway Sensitivity

        Vehicle sway detection sensitivity

        High/Standard/Low

        Standard