PARKING BRAKE LEVER INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. INSTALL PARKING BRAKE LEVER SUPPORT BRACKET

    1. C206779

      Install the parking brake lever support bracket with the 2 bolts.

      15 N*m

      148 kgf*cm

      11 ft.*lbf

    2. Attach the 2 clamps to the parking brake lever support bracket.

  2. INSTALL PARKING BRAKE SWITCH ASSEMBLY

    1. C204997

      Install the parking brake switch to the parking brake lever with the screw.

      0.9 N*m

      9 kgf*cm

      8 in.*lbf

  3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

    1. C204996

      Pass the No. 1 parking brake cable through the parking brake lever.

    2. C208895

      Bend the parking brake lever claw.

    3. C204991E01

      Temporarily install the adjusting nut and the lock nut to the No. 1 parking brake cable.

      Table 1. Text in Illustration

      *1

      Lock Nut

      *2

      Adjusting Nut

  4. INSTALL PARKING BRAKE CABLE END STOPPER

    1. C174877

      Install the parking brake cable end stopper to the No. 1 parking brake cable.

  5. INSTALL PARKING BRAKE EQUALIZER

    1. C172144

      Attach the 2 claws to install the parking brake equalizer to the parking brake cable end stopper.

    2. C172145

      Attach the 2 claws to connect the parking brake equalizer to the No. 1 parking brake cable.

  6. INSTALL PARKING BRAKE LEVER ASSEMBLY

    1. C204993

      Install the parking brake lever with the 2 bolts.

      15 N*m

      148 kgf*cm

      11 ft.*lbf

    2. C204992

      Connect the parking brake switch connector.

  7. CONNECT PARKING BRAKE CABLE

    1. C208896E01

      Connect the No. 3 parking brake cable to the parking brake equalizer as shown in the illustration.

      Table 2. Text in Illustration

      *1

      No. 2 Parking Brake Cable

      *2

      No. 3 Parking Brake Cable

    2. Connect the No. 2 parking brake cable to the parking brake equalizer.

      Tip:

      Use the same procedure described for the No. 3 parking brake cable.

  8. INSTALL NO. 2 CONSOLE BOX MOUNTING BRACKET

    1. C204990

      Install the No. 2 console box mounting bracket with the 4 bolts.

      27 N*m

      275 kgf*cm

      19 ft.*lbf

    2. Install the floor carpet.

  9. CHECK PARKING BRAKE LEVER TRAVEL

    Click here

  10. ADJUST PARKING BRAKE LEVER TRAVEL

    Click here

  11. INSTALL CONSOLE BOX ASSEMBLY

    1. Install the console box assembly (Click here).

  12. INSTALL FRONT SEAT ASSEMBLY LH

    1. Install the front seat assembly (Click here).

  13. INSTALL FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure described for the LH side.

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  15. CHECK SRS WARNING LIGHT

    1. Check the SRS warning light (Click here).